Starting device - LAN
Step 1 - Turn it on
Connect your Raspberry Pi to your solar inverter, plug in your LAN cable an turn it on.
There is no need to plug in a screen or keyboard because the device is designed only to be used via WiFi or LAN.
Step 2 - Open the device web page
Once the device has started, it should be accessible on your local network via http://solar-assistant.local.
Step 3 - Activate or register site
If you purchased a complete device it will be activated already. Go ahead and register it to enable remote access.
If you purchased the "software only" option and use your own Raspberry PI, the "Activate now" button will handle activation and registration in one step.
Step 4 - Start monitoring
Once activated, you can select the hardware you would like to monitor and click connect.