Supported hardware
Please see the table below for supported hardware, expected performance and how SolarAssistant adjusts to the hardware it detects.
| Device | Remarks |
| Orange PI 3 LTS (Must be LTS) |
Data is real-time within 2 - 4 seconds Historic metric every 10 seconds Excellent kiosk video output performance |
| Raspberry Pi 5 |
Data is real-time within 2 - 4 seconds Historic metric every 10 seconds Excellent kiosk video output performance |
| Raspberry Pi 4 |
Data is real-time within 2 - 4 seconds Historic metric every 10 seconds Supports kiosk video output, but it is not enabled by default |
|
Raspberry PI 3 Raspberry PI Zero 2 W |
Data is real-time within 2 - 4 seconds Historic metric every 10 seconds Kiosk video output not recommended |
|
Raspberry PI Zero W Raspberry PI 3A+ |
Data is real-time within 4 - 8 seconds Historic metric every 30 seconds Kiosk video output not recommended |
|
Raspberry PI 1, 2 Raspberry PI Zero | Not officially supported, but used by some users |
NB: The SolarAssistant SD card image only runs on the devices listed above.
Other devices with Docker
Other single-board computers, such as other Orange Pi models, Banana Pi and Rock Pi boards, are supported through Docker instead of the SD card image. The same applies to a PC, server, NAS or virtual machine. The device needs:
- A 64-bit Linux operating system (x86-64 or ARM64).
- Docker Engine and Docker Compose v2 installed.
- A connection to your inverter and batteries: the USB or RS485 adapter plugged into it, or a network path to the inverter's dongle.
Follow the Install with Docker guide to set it up. Virtual machine disk images are not available.
| SD card | Remarks | |
| Recommended: 16GB | 10 years of data for up to 9 inverters | |
| Minimum: 8GB | 10 years of data for a single inverter | |