RS485 port
When it comes to these inverters, you will need an
RS485 self crimp USB cable
using the push in terminals, labeled as "O" in the image below:
| 1 | RS485 B |
| 2 | RS485 A |
You can also read more about this connection method here, or you can watch a video tutorial here.
Steps in SolarAssistant
On the SolarAssistant configuration page, select "Luxpower" as your inverter model.
Select the USB port where your inverter is connected. If you have multiple inverters, you need to multi-select multiple USB ports.
Click connect:
Parallel installations
With Luxpower inverters you will need to connect each inverter with its own cable.