Supported hardware

Please see the table below for supported hardware, expected performance and how SolarAssistant adjusts to the hardware it detects.

DeviceRemarks
Orange PI 3 LTS (Must be LTS) Data is real-time within 2 - 4 seconds
Historic metric every 10 seconds
Excellent kiosk video output performance
Raspberry Pi 5 Data is real-time within 2 - 4 seconds
Historic metric every 10 seconds
Excellent kiosk video output performance
Raspberry Pi 4 Data is real-time within 2 - 4 seconds
Historic metric every 10 seconds
Supports kiosk video output, but it is not enabled by default
Raspberry PI 3
Raspberry PI Zero 2 W
Data is real-time within 2 - 4 seconds
Historic metric every 10 seconds
Kiosk video output not recommended
Raspberry PI Zero W
Raspberry PI 3A+
Data is real-time within 4 - 8 seconds
Historic metric every 30 seconds
Kiosk video output not recommended
Raspberry PI 1, 2
Raspberry PI Zero
Not officially supported, but used by some users

NB: The SolarAssistant SD card image only runs on the devices listed above.

Other devices with Docker

Other single-board computers, such as other Orange Pi models, Banana Pi and Rock Pi boards, are supported through Docker instead of the SD card image. The same applies to a PC, server, NAS or virtual machine. The device needs:

  • A 64-bit Linux operating system (x86-64 or ARM64).
  • Docker Engine and Docker Compose v2 installed.
  • A connection to your inverter and batteries: the USB or RS485 adapter plugged into it, or a network path to the inverter's dongle.

Follow the Install with Docker guide to set it up. Virtual machine disk images are not available.

SD cardRemarks
Recommended: 16GB10 years of data for up to 9 inverters
Minimum: 8GB10 years of data for a single inverter