Inverters › PowMr › 10KW 48Vdc Hybrid Inverter 110/240Vac Split Phase
10KW 48Vdc Hybrid Inverter 110/240Vac Split Phase
10KW 48Vdc Hybrid Inverter 110/240Vac Split Phase
PowMr
POW-SunSmart 10KP
Overview › RS485

RS485 port

When it comes to these inverters, you will need an Self-crimp RS485 cable using the RJ45 pin configuration below:

SNRE RS485 Pins

If you buy any random USB RS485 RJ45 cable on Amazon, Ebay, Takealot, etc. which doesn't specifically state that it supports the Must inverter inverter, it will most likely not work.

Steps in SolarAssistant

On the configuration page, select "SRNE" as your inverter model.

SRNE inverter selection

Select the USB port(s) where you have MUST inverters connected. There will typically be one option.

Select USB devices

Click connect:

Select connect

Parallel installations

With SRNE inverters you will need to connect each inverter with its own cable.

Troubleshooting

If you have any issue, please try the official SolarStationMonitor application from a laptop. If it works with these official applications, then it should work with SolarAssistant.