Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
Online purchases only.
SolarAssistant installed on a Raspberry Pi 5, assembled and ready to start monitoring. It's the easiest way to get started, and great at running the interactive kiosk on a connected screen.
One-time purchase, including lifetime software updates, with no monthly fees.
Depending on your inverter or battery, you may also need a cable. The guide for your inverter or battery says which one.
To set it up, follow the guide for your network setup:
A free 30-day trial is also available on your own hardware: see the getting started guide.
Fully assembled and ready to use
This is our top-of-the-line, ready-to-use option. The Raspberry Pi 5 can easily monitor a large amount of solar hardware while simultaneously running the interactive kiosk. The SanDisk High Endurance SD card ensures durable long-term storage.

Raspberry Pi 5
- 2.4GHz Quad-core 64-bit processor
- 2GB RAM
- SanDisk High Endurance SD card
- 2x USB 2.0 ports
- 2x USB 3.0 ports
- 2.4GHz and 5GHz WiFi
- Ethernet and Bluetooth
- 4K micro HDMI output
Aluminium enclosure
Premium aluminium enclosure with two matt black, soft-touch panels. Small ventilation slots on the bottom of the enclosure with rubber feet to slightly raise the unit to improve cooling.




Passive cooling
The entire enclosure serves as a heat sink to efficiently transfer heat to the environment without any moving parts.
Real-time clock
We install a Panasonic ML-2020 lithium rechargeable battery to take advantage of the new Raspberry Pi 5 embedded real-time clock. This ensures date and time remain accurate without power or internet. Essential for off-grid installations.

9-60V DC USB power supply (Option A)
This power supply powers your SolarAssistant device directly from your battery. It allows uninterrupted monitoring even if the inverter goes into fault mode or disconnects its AC output at the low battery cut-off.
- Suitable for 12V, 24V and 48V batteries
- 9-60V DC input via ring connector (10mm diameter)
- 5V 3A USB type C output
- Length: 2.5m

Official Raspberry Pi power supply (Option B)
A high quality 3A power supply is important for stable 24/7/365 operation as voltage dips can cause USB errors. This power supply includes four interchangeable mains adaptors for Europe/South Africa, UK, Australia and United States.
