MPP Solar monitoring ports
MPP Solar hardware support
All models are supported, including:
Remote monitoring and control
Web, Android and iPhone
Remotely monitor and administer your site via web or our mobile app. All functionality is available via web and mobile.
Multi-site access with a single login
Via the SolarAssistant platform you can get a list of all your sites and access them with a single login. A must have for solar installers.
You can invite new users to your sites which will send them a welcome email that prompts them to set a password. Password resets are self-service via email.
Monitoring battery metrics
Via the inverter
SolarAssistant can read battery metrics such as voltage, current and power from your inverter. If your inverter has a communication cable from the inverter to the
battery, then SolarAssistant can read additional metrics such as battery state of charge and temperature.
Via a USB cable from the monitoring device to the battery
If the monitoring device is connected directly to the battery BMS it can read many additional metrics such as cell voltage, cycles, state of health, etc. It can
also provide metrics for each battery in your battery bank. If your inverter does not have a communication cable from the inverter to the battery BMS, then this is
a must have for accurate state of charge and power management.
Supported batteries when reading via USB cable:
The Sun Pays
Victron BMV and SmartShunt