Starting device - LAN

Step 1 - Turn on the monitoring device

Connect your Raspberry Pi to your solar inverter, plug in your LAN cable an turn it on.

Step 2 - Find device on local network

Once the device has started, open https://solar-assistant.io/sites/local to find your device on your local network.

Step 3 - Activate or register site

If you purchased a complete device it will be activated already. Go ahead and register it to enable remote access.

Registering SolarAssistant site

If you purchased the "software only" option and use your own Raspberry Pi, the "Activate now" button will handle activation and registration in one step.

Activating SolarAssistant device

Step 4 - Start monitoring

Once activated, you can select the hardware you would like to monitor and click connect.

Start SolarAssistant monitoring of solar devices

©2021 SolarAssistant | Terms and conditions | Contact us